Magnetic fidget slider

See the drops

SLATE-01 Mod Revival, a magnetic fidget slider by Detent

The Detent mark opens on SLATE-01 Mod Revival. It floats 54 mm, wags a quarter turn on one corner, clicks 18 mm to the side and loops home. Then its palm size, its reeded grip, its built-in colour and its one clean seam, and its pattern of rings.

Retro Series · Entry 01 · Limited

See the drops

Mod Revival

Retro Series Entry 01

Four tricks, one object. Press one.

A magnetic fidget slider for one hand, 69 × 38 mm. Limited.

Price and date go to the list first.

In skilled hands.

The same four tricks, linked into one run at full speed. The float, a flurry of tail wags, a ladder of clicks, the loop, then all the way round one corner. Turned over, it goes again, faster.

Four tricks to start with. A run like this to work toward.

SLATE-01 Mod Revival does all its tricks at full speed. It floats to the end stop and back, wags its tail again and again, and clicks to the side step by step. Then it loops, and turns all the way round one corner. Then a hand flips it. The other side does it all again, faster, with two full turns, and lands closed.

The trick run · 0:14
SLATE-01 Mod Revival closed, the logo lid up
Closed, the logo lid up

Batch Mod Revival

Retro Series, entry 01. Limited.

Status
Opening soon
Price
Announced at the drop
Run
Limited
  • Sunflower YellowTop plate, rings, logo
  • TerracottaBottom plate, rings
  • CharcoalBoth lids, lines, ticks

The list gets the link first, before anyone else. Drop news only, from Detent.

  1. Join the list.

    One email address. That is all it takes.

  2. The list hears first.

    When a batch is ready, the list gets the link before it goes anywhere else.

  3. Limited, then the next.

    Each entry is a limited run. When it is gone, the next entry opens.

The Retro Series.

One slider, a new look for each entry, in real filament colours. Each entry is a limited run.

  1. Mod Revival Opening soon 1960s
  2. Not announced yet Next
  3. Not announced yet After that
  4. Then a new series.

The numbers.

For the people who read these first. Not all of them are here.

Drawing of SLATE-01 from above and from the side: 69 by 38 mm, 12.6 mm thick, the top plate travels 54 mm 69 38 54 travel 12.6
Millimetres. The top plate at home and, dashed, at the end stop.
Size
69 × 38 × 12.6 mm
Weight
About 57 g
Float
54 mm, home to end stop, no click between
Click
18 mm to the side
Turn
All the way round one corner, once (360°) or twice (720°)
Edge
168 flutes on each plate, 15 to every 18 mm, so they line up at every tick
Colours
Sunflower Yellow, Terracotta, Charcoal
Made
Printed and assembled by hand in San Diego, USA

Sizes and weight come from the design files. The weight is the model's figure for the finished slider.

Questions.

What is SLATE-01?

A magnetic fidget slider you work with one thumb. It is two plates, 69 × 38 mm, small enough for any pocket. The top plate floats 54 mm end to end and wags a quarter turn on a corner. It clicks 18 mm to the side and loops back home. Once you get good, it goes all the way around a corner, once (360°) or twice (720°). Detent makes each look once, in a limited run.

Which magnetic fidget slider should I get?

If you want one slider that floats, clicks, wags and loops, with a 360° and a 720° to work up to, get SLATE-01. If you need something silent for a quiet office, get something else, because SLATE-01 taps as it slides and clicks when it steps. And if you want one you can order any day of the week, this isn’t it either. Each look is a limited run, and the drop list hears first.

Is it loud?

It isn’t silent, and it isn’t meant to be. The top plate taps as it slides and clicks when it steps to the side.

How many does Detent make?

A limited run of each look. The drop list hears first when it opens.

Will Mod Revival come back?

No. Detent makes each look once. When Mod Revival sells out, the next look in the Retro Series takes its place.

What is inside?

That part stays a secret. Whatever makes it float, click and snap home is under two lids. Get one in your hand and see if you can work it out.

Where is it made?

San Diego, USA. Detent is a one-person studio, and it designs every slider there, then prints and assembles each one by hand.

Is it safe?

It has strong magnets and small parts inside, closed under two lids. Never put it in your mouth.

How do I look after it?

Don’t leave it in a hot car or out in the summer sun, because the plates soften in high heat. Keep it away from cards with a magnetic strip, and wipe it clean with a dry cloth.

How do I get one?

Join the drop list. When Batch 01 opens, you get the link first.

For hands that can’t keep still.

Detent is a one-person studio. It designs each slider and builds it by hand.